top of page
Quality is a lifestyle!
Quality
Quality is not a coincidence!
Quality is produced, reported!
Sertifikalar
Welded parts are welded by our certified master welders,
It is done under the supervision of our internationally certified "Welding Engineers", tested and reported by our internationally certified personnel.
> Non-Destructive Testing (NDT) ,
- Magnetic Particle Test ,
- Penetrant and Leakage Test
> Destructive Testing (DT) ,
- Macro Test
> Dimensional Measurement and Controls
- 3D Scanning and Verification (measuring with CMM and Arm)
- Control with Profile Projection
- Hole Inner Diameter Control
- Surface Roughness Value Control
- Secretion Control with Comparator
- Other dimensional controls
You can see some sample applications and reports related to the below.
NDT (Non Destructive Testing)
1) Magnetic Particle Test
Tahribatsız Muayene NDT
Manyetik Partikül Testi
With Magnetic Particle Test
after welding operation
surface and just below the surface
crack control.
Penetrant ve Sızdırmazlık Testi
NDT (Non Destructive Testing)
2) Penetrant and Leakage Test
With Penetrant Test
after welding operation
cracks on the surface are checked.
After Penetrant Test
leak tests as well
is done.
Tahribatlı Kaynak Muayenesi - Makro Test
DT (Destructive Testing)
Destructive Welding Inspection - Macro Test
In order to see the quality of the weld, when necessary, the sample piece is cut and destructive examination is performed.
Welding X-rays can also be taken.
Dimensional Measurement and Controls
1) 3D Scan Verification (Measuring with CMM and Arm)
Boyutsal Ölçüm ve Kontroller
3 Boyutlu Tarama Doğrulama
The parts with 3D solid model drawing are scanned with modern technological devices and the 3D solid model is compared with the real product. Dimension and surface overlaps are reported.
By using these devices and method in "Reverse Engineering" studies, it is of great benefit to transfer the 3D model of the existing product to computer and design programs.
Profil Projeksiyonu ile Kontrol
Dimensional Measurement and Controls
2) Control with Profile Projection
Tooth-pass profiles and sections requiring precise measurement can be measured with a profile projection device.
The measurements made are monitored and reported on the screen of the device in thousandths.
Dimensional Measurement and Controls
3) Hole Inner Diameter Check
Delik İç Çapı Kontrolü
Digital devices that can measure with a precision of 1/1000 of a millimeter are used in measurement after being checked on calibration gauges.
Dimensional Measurement and Controls
4) Surface Roughness Value Control
Yüzey Pürüzlülük Değeri Kontolü
The surface roughness value of materials or parts is measured and reported with digital devices.
Dimensional Measurement and Controls
5) Secretion Control with Comparator
Komparatör ile Salgı Kontrolü
Belt Pulleys, comparators are checked and reported in special mechanisms whether there is any runout in cylindrical parts.
Dimensional Measurement and Controls
6) Other Dimensional Controls
Diğer Boyutsal Kontroller
Control and reporting of precision tolerances with digital micrometers.
.jpg)
Control and reporting of precision tolerances with digital calipers.
Control and reporting of precise angles with digital protractors.
Checks with no-pass and thread gauges
Material Hardness Measurement
Welding Seam Thickness Caliper
Welding Seam Thickness Caliper
Paint and Coating Measurements and Controls
1) Paint and Coating Thickness Measurement
Boya ve Kaplama Ölçüm ve Kontolleri
Boya ve Kaplama Kalınlığı Ölçümü
Paint and Coating Thickness Measurement and Controls
2) Paint Adhesion Test (Cross-Cut)
Boya Tutunma Testi (Cross-Cut)
Paint and Coating Thickness Measurement and Controls
3) Paint and Coating Life Test (Spray Salt Test)
Boya ve Kaplama Ömür Testi (Tuz Testi)
Paint and Coating Thickness Measurement and Controls
4) Paint and Coating Life Test (UV Resistance Test)
Boya ve Kaplama Ömür Tesi (UV Dayanımı Testi)
Paint and Coating Thickness Measurement and Controls
5) Paint and Coating Gloss Test
Boya ve Kaplama Parlaklık Testi (Gloss)
The brands and models of measuring instruments appearing in the photographs, advertising and copyright use belong to the relevant companies.
No material or moral benefit is expected from the fact that this brand information is included on the page.
bottom of page